LS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above LS-6 support.
Other constant and variable speeds from 30 to 90 FPM. Over 90 FPM contact factory. Capacity affected with speed change.
Continuous adjustable channel, fixed channel or Type A & B angle. NOTE: If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing.
Support casters are available in 4 In. or 6 In. diameter. Casters are available in with Steel or Rubber wheels and can be supplied with wheel brakes.
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
5/8 in. Dia. x 8 ft. long unplated rods fully
threaded. Other lengths and galvanized rods available.
Energy efficient, single phase other characteristics. 1-1/2 HP maximum.
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category.